LED Lighting Installation in Ottawa

2700K LED lighting produces a warm yellow glow similar to traditional incandescent bulbs. It's commonly used in living rooms, bedrooms, and dining areas where a softer ambience is preferred. 5000K LED lighting produces a bright neutral white light close to natural daylight. It's suited for kitchens, bathrooms, garages, and commercial spaces where task visibility matters. Ottawa homes built before 1980 in Westboro, Hintonburg, and Vanier often have older warm incandescent fixtures that homeowners prefer to replace with 2700K LEDs to maintain the same light quality. Newer homes in Kanata and Barrhaven are often built with cool white builder-grade fixtures that some homeowners replace with warmer LEDs for comfort. We'll help you select the right colour temperature for each room based on function and preference. The colour temperature is marked on every LED bulb and fixture package.

LED bulbs use 75 to 80 percent less electricity than incandescent bulbs for the same brightness. A 60-watt incandescent bulb replaced with a 10-watt LED saves 50 watts per hour of operation. If that bulb runs five hours daily, the annual savings on your Hydro Ottawa bill is approximately $10 to $12 per bulb at current rates. Homes with 20 bulbs running regularly can save $200 to $250 annually. Exterior security lights left on overnight see the largest impact. Replacing a 100-watt halogen flood light with a 15-watt LED flood light saves roughly $30 per year per fixture. Savings accumulate over the 15 to 25 year lifespan of the LED. Older homes in Ottawa's inner suburbs with incandescent pot lights throughout see the largest total savings from a full LED conversion.

The vast majority of electrical work does not require a permit. If one is needed for your installation, we handle the paperwork. Exterior LED lighting installations on existing circuits typically don't require permits. New circuits run to exterior lights may require an ESA permit depending on the scope of the work. We assess the job and handle any permitting directly. You don't need to contact the ESA or track deadlines. Our electricians work under master electrician licence ECRA/ESA #7018741, which authorises electrical installations across Ontario. Most Ottawa homeowners don't need to think about permits at all. It's part of how we manage every job from start to finish.

LED pot lights can be dimmed, but older dimmer switches designed for incandescent bulbs often cause flickering, buzzing, or limited dimming range with LEDs. The issue is the switch, not the LED. We replace incompatible dimmer switches with LED-compatible models during installation. Modern LED dimmers use different circuitry that works smoothly with LED loads. Ottawa homes built before 2010 in Nepean, Gloucester, and inner suburbs typically have older dimmers that need replacement. Newer homes in Barrhaven and Kanata often have LED-compatible dimmers already installed. We test dimming function on every LED installation and replace the switch if needed. Dimmer replacement adds minimal cost to the job and ensures the lights perform correctly for the full lifespan of the LEDs.

Replacing existing fixtures with LED equivalents typically takes one to three hours depending on the number of fixtures and access. Installing new LED pot lights in a ceiling takes longer because we cut openings, run wiring, and patch around each light. A typical living room with six pot lights takes three to five hours. Exterior LED security light installation usually completes in one to two hours per fixture depending on wiring access and mounting surface. We tell you the expected timeline after assessing the job. Most residential LED installations complete in a single visit. Larger projects involving multiple rooms or full-home LED conversions may take a full day or spread across two visits.

We install LED lighting in offices, retail spaces, restaurants, and small commercial buildings across Ottawa. Common projects include replacing fluorescent tube lighting with LED panels, installing LED track lighting in retail spaces, upgrading exterior building lighting to LED, and installing motion-activated LED security lighting in parking areas. Commercial installations often involve higher ceilings, conduit wiring, and coordination with business hours to minimise disruption. We work evenings and weekends where needed to avoid interfering with daily operations. Our team holds ESA licence ECRA/ESA #7018741, which covers commercial electrical work in Ontario. We've completed LED upgrades in Ottawa commercial spaces ranging from small offices in Centretown to retail shops in Westboro and restaurant spaces across the city.

Smart LED lighting includes bulbs and fixtures controlled by smartphone apps, voice assistants, or programmable schedules. Common brands include Philips Hue, LIFX, and Lutron Caseta smart switches. Smart bulbs screw into existing fixtures and connect to your home WiFi. Smart switches replace standard light switches and control any LED bulbs wired to that switch. We install both types. Smart switches are often the better choice for pot lights and ceiling fixtures because you control all the lights in the room from a single switch without needing individual smart bulbs. Smart LED systems let you dim lights remotely, set schedules, and integrate with home automation. Ottawa homeowners in newer neighbourhoods like Barrhaven and Kanata often add smart LED controls during renovations or new installations. We'll explain the options and install whichever system suits your needs.

We replace fluorescent tube lighting with LED panels or LED tubes. LED panels are flat fixtures that replace the entire fluorescent fixture including the ballast. LED tubes are direct replacements for fluorescent tubes but require removing or bypassing the old ballast. LED panels provide better light distribution and a cleaner appearance. LED tubes are faster to install and work well where the existing fixture housing is in good condition. Both options eliminate the flicker and hum common with aging fluorescent ballasts. Ottawa commercial spaces in older buildings downtown and in Vanier often have T12 or T8 fluorescent fixtures installed in the 1980s and 1990s. Replacing them with LEDs cuts energy use by 40 to 60 percent and eliminates ballast replacements. We assess the existing fixtures and recommend the best LED replacement approach for your space.